Video Mix/Effects
DPM Global Channel Control Over Multiple M/Es
114
Keyframe button—freezes a new image at each keyframe.
Loop button:
• ON—starts the recursive effect.
• OFF—stops the recursive effect and returns to live video.
Keyframe Reset button — is used to control when images are frozen. It is only available
when the Keyframe mode button is selected as the Strobe Type.
• ON—A keyframe triggers a reset, followed by a new single strobe. It resets that loop by
creating a new frozen image at each keyframe that has the Keyframe Reset button on.
• OFF—does not change the frozen image at each keyframe
Force Strobe button—When an effect passes over or stops on a keyframe, a single strobe
event is triggered. While the effect sits on a keyframe with keyframe-strobe on, no
additional events are triggered. The “history” of the prior single event is discarded, and a
single strobe is triggered again.
• ON—accumulates a field/frame of video within the Output Recursive loop.
• OFF—No action is taken.
Mode buttons:
• Over—places the image over the remnant or “montage”.
• Under—places the image under the remnant.
• Erase—erases the image and remnant.
Show Picture Parameter
• ON—(default) displays the live video image in addition to the still montage.
• O
FF—displays only the montage without the live video image.
Matte Control buttons:
• None—No matte.
• Matte—allows you to create a matte fill for the montage and activates the Hue,
Saturation, and Brightness soft knobs for modifying the matte.
• Rainbow—allows you to create an alternating RGB rainbow matte fill for the montage
and activates the Hue Speed, Saturation, and Brightness soft knobs for modifying the
matte.
• Matte Parameter—activates the soft knobs for Hue (or Hue Speed for Rainbow Matte),
Saturation, and Brightness and displays those values.
DPM Global Channel Control Over Multiple M/Es
In the Menu Panel only, multiple M/E Global channels can be controlled. For example if
three keyers in PGM and three keyers in M/E-3 are assigned to Global control, the two M/Es
can be combined to control all six keyers globally by selecting the PRI Global (or SEC Global
if configured with Split M/E) button data pad for each M/E. All keyers on PGM and M/E-3
execute the same transform.
To Next Page
Loading...
