Switcher Control
Learning E-MEM Registers from the Control Panel
126
You can actually enter any combination of seconds, frames and fields. The GV Switcher
system will do the conversion and display the result in seconds, frame, field format.
Decimal values for other non-time parameters are also input in the Master E-MEM area with
the numeric keys, the • button for the decimal, and the Enter button to complete the entry.
If a default value exists for an entry, it can be input without typing in a value by pressing:
•, Enter
The GV Switcher Menu Panel also provides a select activated keypad for entering values
directly into menus, using similar procedures.
Learning E-MEM Registers from the Control Panel
The current operational settings in the work buffer of a control surface Stripe in the Local
E-MEM, or any number of Stripes in the Master E-MEM, can be learned into an E-MEM
register. To learn more about E-MEMs, work buffers, and registers, see the Switcher Concepts
Manual at grassvalley.com.
Learn a Register in the Current Bank
To learn registers in the current bank from the Control Panel:
1 Create the effect.
2 Press the
LRN/Lrn button.
3 Press the keypad number of the desired register.
Learn a Register to a Different Bank
1 Create the effect.
2 Press the LRN/Lrn button.
3 Press the Page button (if necessary).
4 Press the button for the desired page: 0, 100-900.
5 Press the
BNK/Bank button.
6 Press the button of the desired bank.
7 Press the keypad button of the desired E-MEM register.
Alternatively, you can perform the Page and Bank selections, press the
LRN/Lrn button,
then press the desired register button.
Copying E-MEM Timeline Information with Get and Put
The Put and Get feature buttons are provided in the Master E-MEM Module.
Perform a Put
The Put function allows you to copy the E-MEM Timeline information from the current
E-MEM register to another E-MEM register.
1 Press the
EMEM Edit button on the Master E-MEM Module.
2 Press the Put button, the Put menu is displayed.
To Next Page
Loading...
