Switcher Control
Record a Macro
150
5 Perform any actions to be recorded as part of the macro before inserting the User
Pause.
6 Touch
Insert Delay in the status display.
Result:
USER is displayed in the source select button OLED, third button from the right.
Control Panel Macro USER Button in Macro Delegation
7 Press the USER button, and if desired, perform any additional actions to be recorded.
8 Touch
Record Stop.
9 Run the macro.
Result: Any Control Panel button associated with the running macro will tally purple
indicating the User Pause.
10 Press the purple tallied button associated with the macro to resume.
Result: Once completed, the macro button high tallies the macro color (yellow is the
default).
Resuming a Paused Macro
Buttons delegated to macros or with macros attached in a paused state, tally purple. Press
the purple tallied button to resume the macro.
Note: Stopped macros tally the macro color, running macros tally
orange. Pressing a button with a running macro delegated or attached,
stops the macro (pressing it again starts the macro from the beginning).
Run a Macro
Note:
Press the Show Attach button in the Status display to high tally
buttons with macros attached on the Control Panel, including the Master
E-MEM.
Run a Macro from a Delegated Row button:
1 Press the
Macro button in the Delegation row above the Source Select Module.
2 Press a Macro button with an associated macro.
To Next Page
Loading...
