GRASS VALLEY KAYENNE - Append to a Macro; Performing Macro Operations from the Menu; Recording a Macro

Switcher Control
Pre-Attach a Macro
152
Append to a Macro
1 Touch the MAC button in the Status Display and select the Append button.
2 Select a macro:
a Press a Macro delegated row button, or,
b Press
Page, Macro, navigate to a macro register in the Master E-MEM area with an
existing macro, and press the register button.
3 Perform the additional steps using the Control Panel and/or the menus.
4 Complete the recording by turning off the Append button or by pressing the macro
button being recorded.
Performing Macro Operations from the Menu
Recording a Macro
1 Select Macro, Catalog in the menu.
2 Select the Macro Register number button of the register you wish to record into, in the
scrolling list.
3 Select the
Record button.