Switcher Control
Recall a Kayenne P-MEM Register
166
GV Korona M/E Background Button Row Delegation
There are four background buses available on GV Korona system M/Es, buses A, B, C, and D.
You can switch between buses A and C for the Primary Source Select button row or
between B and D for the Secondary Source Select button row.
To switch between buses:
1 For the Primary bus row, press and hold the Primary Delegation button and press the
Pri or Sec button; Pri for bus A or Sec for bus C.
2 For the Secondary bus row, press and hold the Secondary Delegation button and press
Pri for bus B or Sec for bus D.
Fixed Delegation Labels
Press
(A/C)
Press
(B/D)
Fixed Delegation
Buttons
GV Korona Background Bus Button Row Delegation
If the Delegate buttons are not assigned, do one of the following:
1 Reset the default from the Control Panel.
a Press and hold the Pri button then press the Primary Delegation button, and/or
b Press and hold the Sec button then press the Secondary Delegate button.
c Recall Panel Mem 0 to reset the Control Panel to the default, including the
Delegation buttons.
B/D