Switcher Control
Apply a Source Rules Pattern to other Sources
170
additional extended selection. A third alternative is to map all sources on M/E 3 A to select
M/E 3 A on PGM-PST A.
Bus Linking Menu
One-to-one (Single), one-to-many (Parallel), and one-to-one-to-one (Cascading) bus links
can exist simultaneously in the Bus Links, Links Setup menu.
The Bus Links menu is divided into two tabs, the Links Setup menu and the Source Tables
menu. The Links Setup menu has the Current Link pane (on the left) and the Table Setup
menu (on the right).
Use the Bus Links menu to link, enable/disable, break, and choose the source table for bus
links. (Standard Table All Sources 1-to-1 is the default Source Table.)
Selected Controller bus and Linked bus buttons turn blue when selected in the Current Link
pane. In the menu example above, the Linked bus button PGM U2 is the selected button.
The Source Tables menu has the Source Tables pane (on the left) and the Table Setup pane
(on the right). The Source Tables menu is used to select source substitutions within source
tables and create a named relationship between the source table and the links to which
they are assigned.
To Next Page
Loading...
