Switching Basics
Transition Module
182
Transition Module Status Display
The Transition Module Status Display has seven columns with four character rows plus one
row with both BKGD bus text (column 1) and two rows of status indicators for keyers 1-6 or
1-4 (S-series).
BKGD
Bus Keyer 1 Keyer 2
Keyer 3 Keyer 4 Keyer 5 Keyer 6
Row 1: BKD A source (Green) and video
sources for relevant keyers (Yellow)
Row 2: BKD B source (Green) and Key
sources for split keys (Yellow)
Row 3: BKD C source (Green) and Keyer
transition types (Yellow)
Row 4: BKD D source (Green) and Keyer
transition rates (Yellow)
7
2
BLK
BLK
BLK
MIX
30
12
MIX
30
15
23
MIX
10
17
MIX
10
ME1
MIX
10
Bkgd
MIX
10
Row 5: BKD transition type (Green), iDPM
keyer partition (Primary-White and
Secondary-Green) and keyer ON
Orange)
MIX
i DPM
i DPM i DPM i DPM i DPM i DPM
i-DPM
Keyer
ON/OFF
Transition Module Status Display Example
Primary Partition (White)
Secondary Partition (Green)
ON/OFF
Additionally, when the Key Prior button (Keyer Priority) is pressed on the Transition Module,
Row 4 changes from displaying transition rates to Keyer Priority for Keyers 1, 2, 3, etc. and
shows the differences between the current and next priority stacks.
Function Buttons
The top button row, above the lever arm provides the following functions (from left to
right):
Exchange ME
Exchange ME (button icon, left)—Toggle button for fast exchange
(temporary delegation) of an M/E not delegated to a Stripe (see Exchange
ME on page 275 for more information).
Pat Lim—Inactive.
EMEM Run—Runs an E-MEM from the Local or Master E-MEM Module.
• SPOP (single button push) of the EMEM Run button delegates the
lever arm to control the local E-MEM.
• DPOP (double button push) of the EMEM Run button delegates the
lever arm to control the Master E-MEM timeline.
• Pressing the E-MEM Run button again, exits the mode.
To Next Page
Loading...
