Switching Basics
Local E-MEM Module
184
Local E-MEM Module
The Local E-MEM Module is part of an ME Stripe and is organized into two sections, the
mode area (left), with supporting buttons and status display, and two rows of function
buttons (right) for mode selection and effects control. For more information about using
E-MEMs, see Basic E-MEM Operations, on page 125.
Local E-MEM Module Example
Bank buttons BNK 0 - BNK 3 in the Local E-MEM Modules (right side of keypad) provide
faster access to banks. A single press of the button delegates to the bank indicated, a DPOP
of the button takes you to the bank indicated + 4, e.g. one press for Bank 0, DPOP for Bank 4.
The highest bank available is Bank 7 (DPOP of BNK 3 button). The buttons will be unlit for
Banks 8 and 9. A DPOPed selection high tallies cyan (blue) color.
There are several modes available with the Local E-MEM module, accessed by pressing the
following buttons:
•
EMEM—Local M/E E-MEM recall and edit mode,
•
DELG—Change M/E control on selected Stripes,
•
Panel Mem—Learn and recall panel memory,
•
Trans Rate—Set transition rates for M/E,
•
Macro—20 Macro recalls can be set to any page using the Page button in this mode,
• Dissolve Rate—Press Learn, Dis, Trans Rate buttons
Macro
To Next Page
Loading...
