Kayenne/Karrera/GV Korona
User Manual
185
The Local E-MEM Module display shows specific information for each mode, for example if
the Panel Mem button is pressed, Panel Memory information is displayed.
Local E-MEM Module—Panel Memory Example
Master E-MEM Module
The Master E-MEM Module is not part of a Stripe, it provides E-MEM control across the
Control Panel and Local Aux Module. The Master E-MEM Module can control the entire
Kayenne effects system, including e-DPM. The 19 Enable/Delegate buttons (MISC 1-8, PART,
AUX, GPI, PBUS, IS 1-6, and EXT) are used to both enable and delegate, which is determined
by the mode selection (Run control verses Edit).
The Bank buttons BNK 0 - BNK 3 have been placed in the Master E-MEM Module (right side
of keypad) to provide faster access to banks. A single press of the button delegates to the
bank indicated, a DPOP of the button takes you to the bank indicated + 4, e.g. one press for
Bank 0, DPOP for Bank 4. The highest bank available is Bank 7 (DPOP of BNK 3 button). The
buttons will be unlit for Banks 8 and 9. A DPOPed selection high tallies cyan (blue) color.
Macro
To Next Page
Loading...
