GRASS VALLEY KAYENNE - Source Select Module

Switching Basics
Source Select Module
188
Panl, Cali and follow the instructions displayed on the MFM.
• Multi-Function Module, (bottom-right) below the joystick, supports various delegated
functions, for example Copy/Swap and Devices.
• The XFER button, displayed in the Multi-Function Module when the Wipe menu is
displayed, assigns control of values and status display for the five other buttons in
the group to the five soft knobs. Pressing one of the soft knobs delegates control
for numeric entry in the main delegation area. Pressing Enter completes the
numeric entry operation.
Source Select Module
The Source Select Module is available in three configurations: 15, 25, and 35 button models.
Source Select Module Example
Text Display Outlines
Outlines border the display text; this is the default. Outlines can be toggled off/on in the
MFM: from Home, press the
Panl, Bri, buttons then toggle the OUTL (under Joystick)
button.
Source Name Text Wraps
Inserting a space in the Source Name wraps the text to the second line. For example typing
CAM then a space then the number 3 would wrap ‘3’ to the next line of the OLED button
display.
The Source Select Module can be viewed as being in two sections; left for source selection
buttons, in groups of five, with SND (Source Name Display) display and right, with function
and delegation buttons (and one display) for that M/E.
Source Select Device Input Name Modifiers
The device input name modifier symbols provide device status on the Source Selection
display.
8874_02
21
22
23
24
25 26 27
Bkgd2 Bkgd1 ME1
A
ME2 A ME3
A
3RD 2ND
UTIL1
UTIL2
Sec
PGM
Rulle
s
Holld