Kayenne/Karrera/GV Korona
User Manual
195
Device Control Groups
There are six Device Control groups for 25 and 35 button Source Select Modules and two
Device Control groups for 15 button Source Select Modules.
Each Device Control group provides a:
Cue/Load button—Pressing this button after the Prev or Next buttons have been pressed,
sends a load command if the clip is different from the clip currently loaded or a cue
command if the clips are the same.
Play button—Sends a Play command to the selected device (pressing Play a second time
pauses the device).
Display—Displays the current clip.
Prev button—One button press steps backward through the current directory of clips.
Next button—One button press steps backward through the current directory of clips.
Reboot indication—The left-most Device Control display is used as a frame reboot
indication and the next (to the right) Machine Control display is used to indicate a Control
Panel reboot.
Device Control Module
The Device Control Module brings together essential machine controls that are currently
being performed by auxiliary devices, into a single point of control.
Device Control Module Example
The Device Control Module controls all configured devices including:
• Serial control of VTRs and DDRs,
• Ethernet control of VTRs and DDRs,
• Im
age Store, and
• ClipStore.
Device Control Functionality
I ØØ:ØØ:ØØ:22 OU ØØ:ØØ:Ø7:24
D
ØØ:ØØ:Ø7:Ø2 TC ØØ:ØØ:ØØ:ØØ
To Next Page
Loading...
