Device Control
About ChyronHego® Click Effects and Lyric Workflow and Layering
224
Control Menu
Control up to five devices in the Main menu tab and up to eight each in the Dev 1 and Dev 2
menu tabs. The main control channel (left), provides ganging and multiple transport
controls while a subset of those controls are provided for the four channels on the right.
The Dev 1 and Dev 2 menu tabs also provide a subset of the main channel controls for each
control pane.
Devices Control Menu, Main Control Buttons—ClipStore/DDR
Button Description
Device point of
use
•
Selection displays Device Picker
• Engineering name
• Device name
Status:
• Device icon (when provided from manufacturer)
• Connection status bar
Time Code
Enter Time Code in pop-up keypad; 00:00:00:00
Hours, Minutes, Seconds, Frames
Event List
(Active/---)
Displays ‘Active’ with event list loaded, opens file operations
menu
Preset Clip Displays next clip (next event list clip), opens Event list file
operations menu
<>(Swap) Swaps the Preset Clip with the Program clip, taking it on air
Program Clip Displays on-air clip, opens Current Device file operations menu
Gang Status Displays ganged devices when Gang Enable is highlighted
To Next Page
Loading...
