Kayenne/Karrera/GV Korona
User Manual
225
Devices Control Menu, Main Control Buttons—ClipStore/DDR
Gang Enable Enable ganging
Automatically loads next event list clip to Preset Clip
Sets clip to play when loaded to Program Clip
Loop Clip runs continuously, cuing the first frame once the last
frame is played
Progress bar Percentage of clip played
Record Enable Begin recording source
Record Time Enable record time, select data pad to enter Record Time
duration
Mute Mute clip audio for the channel
Cue To Begin Cues to beginning clip or mark in point if set
Mark In Data Pad Displays Mark In time code
Mark Mark clip at current time code
Jog Back Move back one frame
Var Play Speed Play clip faster or slower than 100%, select to enter percentage
in pop-up keypad
Jog Forward Move forward one frame
Rewind Rewind clip
Stop Stop clip
Play Play clip
Fast Forward Advance clip at a fast speed
Swap (Control
panes, right)
Exchange a clip from a Control channel (right) with the Main
Control channel (left)
Event List Menu
Key controls change in the Event List menu based on the device type selected, i.e.
ClipStore/DDR versus graphics devices.
ClipStore/DDR:
• Clip Browser,
• List Edit,
• Event List,
• Loaded
Graphics devices (e.g. ChyronHego® PRIME):
• Scene Browser (Current Folder/thumbnails for View List supported in an upcoming
release),
• List Edit,
• Event List (thumbnails supported in an upcoming release),
• Loaded