GRASS VALLEY KAYENNE - Using Extended GFX Xpression Controls

Kayenne/Karrera/GV Korona
User Manual
237
2 Select an ID by either scrolling with the soft knob or selecting the ID data pad and
entering an ID and selecting
Enter.
3 Select
Take ID.
4 Optionally, select Next to take the next ID in the list; repeat to take the next ID and so
on.
5 To clear the buffers, either select the
Clear Active Buffer or Clear All Buffers.
Using Extended GFX XPression Controls
Setup XPression controls for an ID, a buffer, and a layer, and send those commands to your
external device. Typically, the commands are embedded in the ID but the menu function
buttons allow you to override or fine tune those controls and clear buffers.
1 Select
Devices, GFX, Extended in the menu to access the GFX XPression controls.
2 Select an ID, Buffer, or Layer by either scrolling with the soft knob or selecting the ID