GRASS VALLEY KAYENNE - Device Control Module

Kayenne/Karrera/GV Korona
User Manual
245
CS-1
12
345 MISC4
I ØØ:ØØ:ØØ:ØØ OU ØØ:ØØ:ØØ:ØØ
D ØØ:ØØ:ØØ:ØØ TC ØØ:ØØ:ØØ:ØØ
GV/BrightStar
K2-1 K2-2 K2-3 K2-4 CLR
CS-1 CS-2 CS-3 CS-4
TC In Out
IS 1 IS 2 IS-3 IS 4
IS 5 IS 6
ENT
In
Jog
GOTO Mode
Pressing the GOTO TC button on the Multi-Function Module provides delegation to the
Timecode Entry mode, and delegates control over the Timecode display in the upper left of
the Main function area.
Entering the first digit causes the display to be set to zero and the first number entered.
Additional entries accumulate from right to left.
Plus (+) and minus (-) buttons are provided on the Multi-Function Module in GOTO mode to
perform trim operations.
Enter the timecode:
1 Press the
GOTO button.
2 Enter the timecode using the examples below.
3 Press the
ENTER button. The Multi-Function Module returns to Device Control mode.
Examples of Timecode entries
22 — 00:00:00:22
2 — 00:00:00:02
102 — 00:00:01:02
The
CLR button on the Multi-Function Module empties the buffer and resets timecode
display to the current timecode.
Pressing the
HOME button returns the Multi-Function Module to the Device Control mode.
Device Control Module
The Kayenne Device Control Module provides essential Device Control which can replace
auxiliary devices such as DNF and Lance controllers, PDR Panels for Profile and EVS, and
Hard controllers for EVS/Omega/FFW.
Device Select
(Turn to Scroll)
Clip
Select
(Turn
to Scroll)
Device Selection, Device Control Module
8623267_22