GRASS VALLEY KAYENNE - About the Delegation Pvw Bus; About Input Selection; About the Setup Selector; Newton Channel Information

Kayenne/Karrera/GV Korona
User Manual
267
Selection of a module parameter to control is mediated though the GV Switcher source
selection mechanism. By selecting a source on the currently delegated Preview bus of the
GV Switcher’s Control Panel, the source’s physical input, and that input’s associated Newton
channel controls are activated on the GV Switcher’s Device menu.
About the Delegation Pvw Bus
The Delegation Pvw Bus pane is used to select which Preview bus will be used to select the
Newton channel to be controlled.
About Input Selection
When a video/key source is selected, you choose to control either the video input or the key
input with the Video and Key buttons.
About the Setup Selector
The Setup buttons are used to select the desired set of controls from the setups defined for
that channel. The menu displays asterisks for setups that have no parameters assigned.
Newton Channel Information
Channel – The number of the GV Switcher input BNC used to select the current Newton
channel is displayed.
Setup Name – The currently selected setup (1-5) is displayed in this pane.
Additional information for the currently selected channel is displayed below.
If multiple modules are daisy chained together in a Newton channel, the information
displayed will be for the module with a parameter assigned to the top knob.