Kayenne/Karrera/GV Korona
User Manual
275
Pressing the KF Duration button in the E-MEM & Timeline menu assigns the keyframe
duration value to the keypad. Once assigned, keyframe durations will be displayed on the
Master E-MEM status display. When the cursor is moved from keyframe to keyframe, the
value will change to reflect the duration of the keyframe where the cursor is located. When
the cursor is moved between keyframes, the duration shown is the distance from the
current time to the next numbered Master Timeline keyframe. The time value displayed is
used by default when a new keyframe is inserted into an effect.
Change Duration for a New Keyframe
The value for a new keyframe’s duration may be set from the keypad.
1 Move the edit cursor to the desired location in the effect, in this case on the path
midway through a one second keyframe.
2 Press
KF Duration button.
3 Type a 1.0 duration value on the keypad and press Enter to change the value displayed
on the readout.
Note: Pressing Emem Edit, <enter value>, TRIM in the Master E-MEM
Module will increase or decrease the duration value by the amount
specified.
4 Press Insert Before or Insert After to insert the new keyframe with the specified
duration.
Duration Specified for Inserted Keyframe
To Next Page
Loading...
