GRASS VALLEY KAYENNE - About Offline Macro Editing with the Frame Simulator; Configure the Frame Simulator; Configure the GV Switcher Menu

Kayenne/Karrera/GV Korona
User Manual
309
About Offline Macro Editing with the Frame Simulator
You can use the Frame Simulator included with the GV Switcher software to edit and create
macros offline and save them to a USB Memory Stick or other storage device making them
portable for use in future shows.
Also in this release, as part of the Frame Simulator interface, you can configure the line rate.
The line rate will affect all transition, timeline, and macro pause durations.
Configure the Frame Simulator
Configure the Frame Simulator line rate using a Windows shortcut:
1 Navigate to C:\Program Files (x86)\Grass Valley\GV Switcher\GVSwitcherSystem_Vx.x.x
\Frame Simulator.
2 Right-click select Create Shortcut.
3 Right-click on the shortcut and select Properties.
4 Append -config to the Target address after main.exe.
5 Open the shortcut to adjust the line rate.
Configure the GV Switcher Menu
Enter the Frame simulator IP Address:
1 In the GV Switcher menu, select
Eng Setup, Node Settings, Frame Suite Nodes & ID.
2 Select the
Frame IP Address data pad.
3 Enter 127.0.0.1 as the Frame IP address in the Frame IP numeric keypad and press
Enter.