Kayenne/Karrera/GV Korona
User Manual
329
Re-center the image:
1 Select the Crop Edge data pad.
2 Select the
Pan or Scan button.
3 Use the Crop Edge Pan or Crop Edge Scan soft knob to pan or scan until the image is re-
centered.
Note: Panning scanning beyond (+ 16:9 for example) can have
unexpected results, i.e. the picture may begin to stretch.
Corner Pinning from the Kayenne Control Panel
Corner Pinning can be performed from the MFM (Multi-Function Module), in the iDPM (and
identically the eDPM), CPin menu.
To Next Page
Loading...
