Kayenne/Karrera/GV Korona
User Manual
35
The Logical/Fixed Sources area:
• Sources scrolling list—used to locate assignable sources. You can choose from Logical
or Fixed Sources
• Source Number data pad—displays a data entry pop-up when selected and is used to
assign a Logical source number to a source select button
• Source Filter data pad—displays a data entry pop-up when selected and is used to
perform alpha-numeric, case sensitive searches of Logical or Fixed sources
• Show All button—displays all sources in the scrolling list
• Lock button—locks the scrolling list; helpful for selecting multiple adjacent sources
Map Control Panel Source Select Buttons
In this example, a source will be delegated to the source select button for the PGM/PST
bank. The process is the same for the Local Aux bank.
TIP: Define the Control Panel source select button mapping Source
Names in the Eng Setup, Source Definition menu before continuing.
1 Select User Setups, Panel Prefs, Button Mapping.
2 Select the PGM/PST Bank button (notice the Select All button is now available).
When multiple banks are selected, the source delegation will be applied to the same
button on each bank, including the Local Aux.
3 In t
he Sources pane, center of the menu, select a source data pad.
4 Select a Logical or Fixed source in the right-hand pane.
Result: As the button mappings change, the new source names will appear on the
source name displays of the source selection buttons on the Control Panel and/or Local
Aux.
Assign a Control Panel Color Scheme
Panel Color Scheme selections are applied to the M/Es, Keyers, and Delegation Control
Panel buttons (not sources). You can change a Control Panel system color scheme from the
default.
Note: The five User Colors are shared between the Source Colors and
Panel Color Scheme menus.
To Next Page
Loading...
