GRASS VALLEY KAYENNE - Copy a Keyer; Copy E-Dpms; Swap E-DPM Channels

Kayenne/Karrera/GV Korona
User Manual
347
Copy a Keyer
1 From the Home mode in the Multi-Function Module, press the Copy button.
2 Select the Source ME.
3 Select a Source Keyer (
K1-K6) (Keyers can also be copied to e-DPM Channels and vice
versa).
4 Select the Destination ME.
5 Select a Destination Keyer (e-DPM Channel).
6 Press the
Copy button (below the joystick).
To Swap Keys:
1 From the Home mode in the Multi-Function Module, press the Swap button.
2 Select the Source ME.
3 Select the Destination ME.
4 Select a Destination Keyer (Keyers can also be swapped with e-DPM Channels and vice
versa, see Swap e-DPM Channels, on page 349).
5 Press the
Swap button (below the joystick).
Copy e-DPMs
e- DPM Channels can also be copied to Keyers and vice versa.
1 From the Home mode in the Multi-Function Module, press the Copy button.
2 Press the Source eDPM button, K1-K4 buttons of the top row are now assigned as e-
DPM channels Ch1-Ch4 (the button legends remain K1-K4).
3 Se
lect a Source e-DPM channel.
4 Select the Destination eDPM button (K1-K4 destination button LED labels change to
Ch1-Ch4).
5 Select a Destination e-DPM channel.
6 Press the Copy button (below the joystick).
Swap e-DPM Channels
e- DPM Channels can swapped with Keyers and vice versa.
1 From the Home mode in the Multi-Function Module, press the Swap button.
2 Press the Source eDPM button, K1-K4 buttons of the top row are now assigned as e-
DPM channels Ch1-Ch4, however the button legends remain K1-K4.
3 Select a Source e-DPM channel.
4 Press the Destination eDPM button, K1-K4 destination button LED labels change to
Ch1-Ch4.
5 Select a Destination e-DPM channel.
6 Press the Swap button (below the joystick).