GRASS VALLEY KAYENNE - Map Image Store Input Delegates; Capture a Still from Input Video

Kayenne/Karrera/GV Korona
User Manual
351
Kayenne/Karrera/Korona Installation & Service Manual).
4 Returning to the Acquire Resources menu, acquire available memory using the
Left
Arrow
button.
Map Image Store Input Delegates
Delegate Image Store inputs to the aux bus delegates on the Local Aux Module:
Note: Alternatively, you can select Image Store input sources from the
Image Store menu.
1 Select User Setups, Panel Prefs, Aux Delegate Mapping.
2 Select a Local Aux Module button in the Button/Delegation scrolling list.
3 Select an Image Store input (
IS A-IS B) in the Internal Destination scrolling list.
Capture a Still from Input Video
Image Store channels use the “Grab” function to capture a still (in RAM) and the “Keep”
function to load that still into cache. A “grabbed” still can be replaced with another Grab.
Stills can be captured as a video/key pair or video only (when replayed, video only stills will
have a full raster white key applied).
1 Do one of the following:
• Setup the input sources on the Local Aux Module (see Map Image Store Input
Delegates, on page 353), or
• In the Image Store, Images, Stills menu: