GRASS VALLEY KAYENNE - Create an Image Store Still with Another Video (Not Key)

Kayenne/Karrera/GV Korona
User Manual
353
Image Store video/key still is captured, in the Image Store, Images, Stills menu, the video
and key signals are from the same source. Split Key allows you to change the key signal
source.
1 Navigate to the Source Ops, Image Store menu by selecting the Src Ops Quick Tab or
the Source Ops, Image Store menu buttons.
2 Select the Split Key button to turn it on.
3 Select the IS Input B button (top-right, center of menu) to select it, then select a source
from either the Logical or Fixed sources scrolling list to change the key signal source.
Create an Image Store Still with another Video (Not Key)
Image Store channels capture a video/key still as the default. A still can also be captured
using another video for a video/video still by changing the key to video in the Source Ops,
Image Store menu.
1 Navigate to the Source Ops, Image Store menu by selecting the Src Ops Quick Tab from
the Image Store, Images, Stills menu or the Source Ops, Image Store menu buttons.