GRASS VALLEY KAYENNE - Modify a Still; Set Freeze Mode; Kayenne Image Store Device Control

Kayenne/Karrera/GV Korona
User Manual
355
Modify a Still
To find and modify stills without loading them to a channel:
1 Toggle the
Auto Load button to off.
2 Select the Scroll Image List soft knob button data pad to display the Enter an Image ID
to go to keypad.
3 Enter an image number, then select
Enter.
Set Freeze Mode
In interlaced formats, Freeze Mode can be set to Frame, Field 1, or Field 2. This is very useful
if you need to eliminate motion flicker or artifacts from an interlaced still.
1 Select a still from the scrolling list.
2 Toggle the
Capture Still button off.
3 Select the Freeze Mode button.
4 Viewing the still on a monitor, select the
Frame/Field 1/Field 2 buttons to change the
mode for the best result.
5 Select the
Confirm button.
Kayenne Image Store Device Control
Stills can be controlled from both the DCM (Device Control Module) and the System Bar on
the Control Panel.