Advanced Operations
Image Store Movies Option
356
The DCM (Device Control Module), allows you to scroll through and select an Image Store
channel (1-10), select a still for the channel, and load that still.
Image Store Device Control—Device Control Module
1 Use the soft knob in the upper right of the DCM to scroll through the devices until the
desired Image Store channel is seen in the display.
2 Use the bottom-most soft knob to scroll through the stills until the desired Image ID is
displayed.
3 Press the
Load button (right).
The still is loaded to the Image Store output channel.
Kayenne System Bar Control
Image Store channel stills can be selected and loaded from the System Bar Module.
Image Store Device Control—System Bar
1 Press and hold down a source select button that has an Image Store channel attached.
2 Press the
PREV and NEXT buttons together in the desired Device Control Group
(alternatively, you can press and hold down the
PREV and NEXT buttons and then press
a source button).
3 Press the
Prev/Next buttons for that Device Control Group until the desired still is
displayed.
4 Press the
Cue/Load button to load the still.
Play
Prev
Play
Prev
To Next Page
Loading...
