GRASS VALLEY KAYENNE - Copy a Movie with Build Edit; Build a Movie Using a Key and Video from Different Movies

Kayenne/Karrera/GV Korona
User Manual
369
Build Edit Menu Buttons
Element Area Button State Description
All (Video/Fill,
Audio, Key/Cut)
Thumbnail Viewer
Image Store
Channel
selected/Movie
loaded
Thumbnail of the currently loaded clip
Change Movie Change Image Store channel movie
GoTo In Go to mark-in point in the movie
GoTo Out Go to mark-out point in the movie
Mark In Set mark-in point in the movie
Mark Out Set mark-out point in the movie
Mark In/Mark Out
Timecode Data Pads
Enter mark-in/mark-out timecode for the element
Mark Thumbnail Select thumbnail image from the Video/Fill element’s
current position
Build Movie Builds a movie from the composite elements
Enable Edit Enables Build Edit for selected Video/Fill Image Store
movies (Enable Edit must be disabled for selected
channels to be output from the switcher)
Video Fill Mark Thumbnail
Timecode Data Pad
Enter mark point for thumbnail image in timecode
Key/Cut
Key from Video
On Key comes from movie in Video/Fill
Off
• Key comes from movie in Key/Cut
• If no key is loaded in channel, key is removed and full
raster white is used when Build Movie is performed
Video Key
On Key comes from movie in Video/Fill channel (default
when Key from Video button is off)
Off
• Cut comes from movie in Key/Cut channel
• If no cut is loaded in channel, cut is removed and full raster
white is used when Build Movie is performed
Lock Key
On
• Key/Cut signal locked with Video/Fill channel timeline
• Playback motion control enabled
Off
Playback motion control of Key/Cut channel only
Copy a Movie with Build Edit
With the Build Edit menu, you can create a duplicate of an existing Image Store movie
including the key. This allows you to retain the original movie and edit the copy.
1 In the Image Store, Images, Movie Edit menu, select
Build as the Edit Type.
2 Select an Image Store channel for the Video/Fill element (right).
3 If desired, select the
Change Movie button to select a different movie.
Build a Movie Using a Key and Video from Different Movies
The key of the Key/Cut channel can be paired with the video in the Video/Fill channel to
create a new movie using the Build Edit feature.