GRASS VALLEY KAYENNE - About Image Restore; Image Restore Button Functions; Enable Image Restore

Kayenne/Karrera/GV Korona
User Manual
379
1 Select the Local Backup Path data pad.
2 Select to select a source folder by navigating to an existing folder in the navigation
pane (left).
3 Select the Restore Cache Start toggle button to begin the restore operation (border
highlights green).
a If restoring from a scheduled backup, verify that the Local Backup Path shows the
correct path.
About Image ReStore
Image ReStore allows you to automatically load stored Image Store files after a system
reboot or during switcher operation. Each suite has an independent Image ReStore.
Image ReStore includes the following functionality for storing and loading files:
• Automatically restore stills and movies after a system reboot,
• Edit saved files in Image ReStore using common file operations, so only the files you
need will be included, reducing file load durations, and
• Save or load files during switcher operations.
Image ReStore Button Functions
The Image ReStore button pane is located in the Image Store, Backup & Restore, Library
menu.
Image ReStore Button Functions
Image ReStore Button Functions
Button
State
Description
Enable On/Off toggle When on, saved Image Store files will be loaded after a
system reboot
Image ReStore Button Functions
Button State Description
Store Start On - Starts storing files
Off - File storage complete
• When enabled, starts storing the files from Image Store cache
to the Image ReStore folder
• Replaces the entire contents of the ReStore folder
• Files will be restored after a system reboot
• File storage can be stopped by turning off the Store Start
button
ReStore Start
On - Starts loading files
Off - Restore Complete
• On—When enabled, starts restoring files from the Image
ReStore folder to the Image Store cache
• Off—Restore complete
• File restore can be stopped by turning off the ReStore Start
button
Enable Image ReStore
When Image ReStore is enabled, any stored files will be reloaded after a system reboot.
Image ReStore automatically stores any cached still or movie.
1 Select Image Store, Backup & Restore in the menu.
2 In the Image ReStore menu pane, turn on the Enable button (green highlighted
border).