Advanced Operations
Summit/Solo Software Version
382
CAUTION: Do not use AppCenter Elite software for ClipStore from the
Summit/Solo server web site as it may not be compatible.
For more information about installing and updating AppCenter Elite software, see the
Summit/Solo manuals.
ClipStore as an External Device
Note: ClipStores 1-4 as devices can only be enabled in the Eng Setup,
Devices, Node Settings menu in the Frame Suite Nodes & ID menu tab.
When assigning devices to E-MEM levels, ClipStore is devices 29 through 32.
ClipStores 1-4 will appear as the first four external devices in the Device Enables scrolling
list, in the Devices, Enables menu (and other Devices menus). External Device 1 will now be
in the 5th position in the Device Enables list. Enable/Disable buttons in the Devices menu
do not function for ClipStore.
Note: For a two-channel K2 Solo, only ClipStores 1 and 2 are reserved
and External Device 1 will be in the 3rd position.
ClipStore can be used in a gang like any other external device. For more information about
ganging devices, see Router Interface Operation, on page 253.
To Next Page
Loading...
