Advanced Operations
Load a ClipStore Clip
384
Select a Folder
1 Select the Current Folder data pad located just above the scrolling clip list to change
the current folder. The Folders/Clips menu is displayed.
2 Select the folder you wish to be the current folder and either select a clip on the right or
press the
Cancel button (bottom right of menu, to close and return to the Clips menu (if
the Cancel button is selected, the folder will still be changed but it will not result in a
clip load).
Menu Clip Selection
Clips can be selected in three ways in the menu:
• Selecting a clip in the scrolling clip list,
• Selecting the Scroll Image List data pad, and entering the Image ID for the clip
(ascending numeric value in the current folder).
• Selecting the Current Folders data pad and then selecting a clip in the Current Clip
scrolling list.
With the
Auto Load button selected (highlighted green), the clip will be loaded into the
selected ClipStore channel.
Load a ClipStore Clip
1 Turn on Auto Load by selecting the Auto Load button.
To Next Page
Loading...
