GRASS VALLEY KAYENNE - Mark a Clipstore Thumbnail; Clipstore Trim and Remove

Advanced Operations
Make Sub-clips from the Current Clip
392
Mark a ClipStore thumbnail
The Cut Edit menu displays the currently loaded clip in the thumbnail view. If you wish to
change the clip, select the
Change Clip button before editing.
1 Select the
Change Clip button to select a clip to edit (unless previously loaded).
2 Either jog, shuttle, or play to the desired frame and select the Mark Thumbnail button
or,
3 Select the
Mark Thumbnail data pad and enter the mark point in the pop-up Mark
Thumbnail Point keypad, and select Enter.
4 Select the
Mark Thumbnail button—the new thumbnail replaces the old in all views.
ClipStore Trim and Remove
Material can be removed from the head of a clip to a mark-in point and from a mark-out
point to the end of a clip. Both operations can be performed on a single clip.
Trim Clip operations include:
• Setting only the mark-in point, and selecting the Trim Clip button—the clip will be
trimmed from the beginning of the clip to the mark-in point.
• Setting only the mark-out point, and selecting the Trim Clip button—the clip will be
trimmed from the mark-out point to the end of the clip.
• S
etting both a mark-in and mark-out point, and selecting the Trim Clip button—the
clip will be trimmed on both ends (beginning of clip to mark-in and mark-out to end of
clip).