41
Suite Preferences
Suite Preference Settings
Suite Preferences define the Video Frame settings for the switcher system. You can
customize the Suite Preferences for each suite. Some Suite Preference settings are
described in the Advanced section (Advanced Operations, on page 271), along with
operations, including E-MEM, Re-Entry, GPI Inputs, Image Store, and Transition Chaining.
About Suite Resources
The Suite Resources menu allows you to allocate resources for Aux bus transitions, set Suite
Signal Type parameters, and enable/disable Re-Entry Restriction.
Aux Bus Transitions
See Aux Bus Transitions, on page 211.
About Suite Signal Type—HDR Mode
GV K-Frame XP systems transmit Payload ID parameter values based on the Frame
Operating Mode unless an HDR Mode is selected. When in an HDR mode, all outputs for the
current suite will transmit the HDR Payload ID parameter values.
Note: GV K-Frame XP systems transmit HDR Payload ID parameter values
only, signals are not converted.
The following HDR modes are supported:
• SDR—Standard HD (Frame Operating Mode Payload ID)
• S-Log3—Gamma curve
• PQ—Perceptual Quantization
• HLG—Hybrid Log-Gamma
Default settings
• HDR Mode—SDR
• Color Space—Rec 709
• Bit Depth—10-Bit
To Next Page
Loading...
