GRASS VALLEY KAYENNE - Patch Engineering and Fixed Sources to Logical Ids

Kayenne/Karrera/GV Korona
User Manual
47
Once the Suite Prefs and effects are loaded at the new facility, go to the Source Patch menu
and map the appropriate Engineering sources of the new facility to the original list of
Logical sources. Your effects should now run as previously designed without having to edit
or rebuild them. When satisfied the effects run correctly at the new facility, save that Suite
Prefs under a different name for use the next time you use this facility. Do not overwrite the
original Suite Prefs, as you will need it when you return to the original facility.
Patch Engineering and Fixed Sources to Logical IDs
1 Select User Setup, Suite Prefs, Source Patch.
2 Select the Eng Sources/Fixed Sources button to select a source type.
3 Select the Logical ID of the source you wish to change by either:
• Selecting the Logical ID data pad and entering the Logical ID number, or
• Scrolling through the Source Names list with the scroll bar. This scrolls the list
without changing the current selection. When the desired source appears on the
menu, select its Logical ID button to select it. Use the
Lock button to lock the scroll
bar.
4 Give sources alternative names in the Source Patch menu in the following ways:
• Panel Name —Source will appear in the Transition and Multi-Function displays
with this name,
• OLED Name (SND Name column)—Source Name Display will appear in mapped
M/E/PGM PST Source Select and the Multi-Function displays with this name,