Kayenne/Karrera/GV Korona
User Manual
51
About the Multiviewer Prefs Menu
The K-Frame Multiviewer Prefs menu provides five layout configurations (six on the K-
Frame XP), tally preference settings, assignable Fixed and Logical inputs, Switched Preview
or Aux Buses to each video window. Multiviewer menu preferences are saved as part of
Suite Prefs and can be loaded or excluded as part of the Load Granularity in the File Ops,
Eng Setup menu.
Prerequisite: Multiviewer resources have been allocated and configured, see the
K-Frame Installation & Service Manual.
The K-Frame M/E Viewer optional feature provides a special source from each M/E that can
be used to display multiple M/E signals on a single monitor. Each M/E has a fixed source
named (ME) pM (ME = 1-4 or Pg). This source can be assigned one of six multiple signal
arrangements. Assigning this source to a physical output connector allows you to view that
signal arrangement on a monitor.
Preview Programs
Preview Programs Primary Secondary Keys
Program Preview Keys
Primary Preview Program Keys
To Next Page
Loading...
