Suite Preferences
Set Multiviewer Layout Preferences
52
Set Multiviewer Layout Preferences
Choose from one of five Multiviewer layouts:
1 Select User Setups, Suite Prefs, Multiviewer Prefs.
2 If there is more than one Multiviewer acquired, press the Identify button to display the
available Multiviewers in the top, middle of the monitor so the correct Multiviewer will
be selected for adjustment.
3 Select a Multiviewer to apply the preferences; buttons MV1-MV4 below the layout
configuration pane.
4 Select a layout from the Layout list on the left side of the menu.
5 Select a window in the Multiviewer layout.
6 Select Logical or Fixed above the scrolling list on the right of the menu.
7 Scroll or filter to an input and select that input to assign it to the selected window.
The window name is taken by default from the Eng Sources name but will take the Menu
name if entered in the User Setups, Suite Prefs, Source Patch menu for the selected source.
8 To enter a name in the Menu column of the Source Patch menu to change the window
name:
a With the source assigned and the window selected in the Multiviewer Prefs menu,
note the Source Number in the upper right data pad.
b Select the Source Patch menu tab.
To Next Page
Loading...
