Kayenne/Karrera/GV Korona
User Manual
67
Load Source Tables or Source Rules
Load operations for the Source Tables and Source Rules menus are identical. Loading
Source Tables will be described in this example.
1 Select,
File Ops, Source Tables.
2 In the System or Remote Storage menu tab (left side of menu), navigate to the Source
Tables file you want to load.
3 Select the
Load button in the File Operations pane.
About Register-Based File Ops Menus
File operations for the Panel MEM, E-MEM, Macros, Cues, and Router MEM register-based
menus, are nearly identical, the difference being the number of registers, for example the
E-MEM menu has 1000 register files while the Macro menu has 999, and Router MEM has
100, and so on. Keep this in mind when entering registers.
Buttons in the Utilities pane and most of the File Operations pane buttons are the same as
all the File Ops menus (see About the File Ops Menus), however, the Register function
buttons in the center of the menu and others in the File Operations pane, are unique to
register-based menus:
Register files are named by their bank and register number. For example, the filename for
E-MEM register 5 in Bank 2 would appear as EMEM25. File names consist of the bank and
register appended with.GVR. It is important that these files retain these names, as the
number determines which register will receive the data when loaded. In fact, register files
To Next Page
Loading...
