Video Mix/Effects
Enable/Delegate DPM Channels
92
a In the Logical Resources pane, turn on the DPM Chns button.
b Release channels by moving them from
Channels to Available (up to six for
acquisition by eDPM) using the
-> (Right Arrow) buttons in the eDPM/iDPM
Channels acquisition groups.
c Acquire available DPMs using the
<- (Left Arrow) buttons.
Enable/Delegate DPM Channels
DPMs acquired by a suite can be assigned to keyers for creating effects and taking them to
air (for DPM suite acquisition, see Kayenne/Karrera/GV Korona Installation & Service Manual).
Enable DPMs on the Kayenne Control Panel
1 From the Kayenne Control Panel, in the MFM (Multi-Function Module) Home menu,
press an
ME button.
2 Press a Key button 1-6 or hold and press for multiple channel control.
3 Press the
iDPM button.
Delegate eDPM Channels
1 From the Kayenne Control Panel, in the MFM (Multi-Function Module) Home menu,
press the
eDPM button.
Note: The acquired eDPM channels are delegated to the keyer row,
displayed in cyan (blue). Once delegated, eDPM channels are always
enabled.
To Next Page
Loading...
