GRASS VALLEY KAYENNE - Enable Idpms on a Karrera Control Panel; Delegate Edpm Channels; Enable a 2 D DPM on a Keyer; Enable Dpms from the Menu

Kayenne/Karrera/GV Korona
User Manual
93
2 Press a channel button or hold and press for multiple channel control.
Enable a 2D DPM on a Keyer
1 From the Kayenne Control Panel, in the MFM (Multi-Function Module) Home menu,
press an
ME button.
2 Press a Key button 1-6 or hold and press for multiple channel control.
3 Press the
2DPM button.
Enable iDPMs on a Karrera Control Panel
1 From the Karrera Control Panel, in the Modifier Area press an ME button.
2 Press a Key button 1-6 or hold and press for multiple channel control.
3 Press the
iDPM On button.
Delegate eDPM Channels
1 From the Karrera Control Panel, in the Modifier Area, press the eDPM button.
2 The acquired eDPM channels are available in the keyer row, displayed in cyan (blue);
when delegated, eDPM channels are always enabled.
3 Press a channel button or hold and press to select multiple eDPM channels.
Enable a 2D DPM on a Keyer
1 From the Karrera Control Panel, in the Modifier Area, press an ME button.
2 Press a Key button; 1, 2, 3, etc., or hold and press for multiple channel control.
3 Pre
ss the 2DPM On button.
Enable DPMs from the Menu
For DPMs, double-select the keyer/channel to delegate the DPM:
• iDPM— select iDPM, Transform, Keyers iDPM tab and double-select one or more keyer
buttons.