Kayenne/Karrera/GV Korona
User Manual
95
2D DPMs
There are six 2D DPMs per M/E, including the eDPM. Each can be sized, scaled, and moved
along X and Y axis. 2D DPMs match the iDPM positioning of Post Transform control.
Kayenne (only) Parameter and Soft Knob Controls
When any of the MFM positioning parameter buttons are pressed, the soft knobs and
joystick buttons are delegated for control of that parameter.
Multi-Function Module, iDPM Control Mode
• SzLc—Size Locate (within 3D space)
Note: The X and Y axis modifiers are changing the same as the X and Y
values for 3dLc.
• 3dLc—X, Y, and Z 3D Locate
• ROT—Rotate
• SPIN—Spin
• Axis—Locate Axis
• ASPT—Aspect
• SKEW—Skew
• PRSP—Perspective
• 2DLc—Post Transform (X, Y, and Z locate in 2D space)
The PGLB (Primary Global) and SGLB (Secondary Global) buttons available in the iDPM
Mode in the MFM, activate keyers delegated to Primary and Secondary Global Channels
(iDPM Keyer delegations can only be made in the Menu Panel).
Note: The SGLB button is available in split M/E mode.
SzLc 3dLc
ROT
SPIN
Axis Adel Last
iDPM ASPT
SKEW PRSP 2DLc PGLB
To Next Page
Loading...
