GRASS VALLEY LDX 150 - Production Setup

100
Menu references
Production Setup
Production Setup
Function: Values: U: F: Description:
Levels
Gain
HDR Gain -6 dB..18 dB (0 dB) 2 S HDR Gain (in 0.1 dB steps)
HDR Out Lvl 50% .. 66% (57% for
SMPTE2084)
50% .. 87% (73% for
HLG)
2 - HDR Output Level: HDR video level that corresponds
with 100% video level in SDR.
Note: default values depend on the selected HDR
Standard.
Gain Presets
Gain - -6 dB..-3 dB (-3 dB) 2 O Gain value for - preset
Note: Available preset values depend on the selected
sensitivity mode
Gain + +3 dB..+12 dB (+3 dB) 2 O Gain value for + preset.
Note: Available preset values depend on the selected
sensitivity mode
Gain ++ +6 dB..15 dB (+6 dB) 2 O Gain value for ++ preset
Note: Available preset values depend on the selected
sensitivity mode
Gain +++ +9 dB..+18 dB (+12 dB) 2 O Gain value for +++ preset
Note: Available preset values depend on the selected
sensitivity mode
Black
Full Black Off, On 3 - Select to run Full Black calibration.
Note: this takes up to 15 seconds to complete
Master Black 0..99 (50) 2 S Master Black level: this is the video level that is
considered as pure black
Advanced
Master Black 0..99 (50) 3 S Master Black level: this is the video level that is
considered as pure black.
Black R 0..99 (50) 3 S Black level for Red
Black G 0..99 (50) 3 S Black level for Green
Black B 0..99 (50) 3 S Black level for Blue
HDR
HDR Standard SMPTE2084, HLG,
SLOG3, Lin
3 S HDR Standard: SMPTE 2084 (or PQ, Perceptual
Quantization) or HLG (= Hybrid Log-Gamma), S-Log3 or
Lin (Linear)
HDR Range Narrow, Full 3 - If HDR Standard = SMPTE2084:
- Full: the HDR signal is mapped into the full 10-bit
range of the digital signal (3 .. 1021)
- Narrow: Narrow: the HDR signal is mapped into the
code value range between 64 and 940.