110
Menu references
Configuration menu
Configuration menu
Function: Values: U: F: Description:
Security
Installed level User0, User1, User2,
User3
S - User access level. Note: switch the camera off and on to
take the changes into effect
PIN Code <nnnn> S - Enter PIN code to access Service level (S).
Customer Files
Store Cust Scene Exec, ... S - Stores the current Scene settings to the Customer
Scene File.
Cust Scene Attr R/W, R S - Selects the read/write attribute for the selected
Customer Scene File: R/W = Read and Write; R = Read
only.
Store Cust Oper Exec, ... S - Stores the current Operator settings to the
Customer Operator file.
Green button
Std Scene File Fact, Cust S - Selects the Scene file to be recalled when the STD File/
Green button is pressed:
Fact = Factory (default) Scene file
Cust = Customer Scene file
Std Oper File Fact, Cust S - Selects the Operator file to be recalled when the STD
File/Green button is pressed:
Fact = Factory (default) Operator file
Cust = Customer Operator file
Scene File Yes, No S - Determines if the Scene file should be
recalled when the STD File/Green button is pressed.
Oper File Yes, No S - Determines if the Operator file should be
recalled when the STD File/Green button is pressed.
DeviceID Reset Exec, ... S - Resets DeviceID to factorry value.
Factory Reset Exec, ... S - Resets ALL camera settings to their factory defaults.
Files
Scene Files
Store
File Select Standard, SCam1,
SCam2, SCam3, SCam4
2 - Selects a Scene File for storing.
Store Exec, ... 2 - Stores the Scene settings in the selected Scene file.
Recall
File Select Standard, SCam1,
SCam2, SCam3, SCam4
1 - Selects a Scene File for recall.
To Next Page
Loading...
