23
4
IP Media setup
Camera Connect
+
Note
+ ☞
Note
Make sure the version of Camera Connect 1.64 or higher.
Camera Connect is Grass Valley’s configuration and setup tool for camera systems. The
software comes pre-installed on the CCS-One Cameras Control Server and can be accessed
through the C2IP network by a web-browser that runs on a PC or tablet computer.
• Make sure you are connected to the C2IP network. Open the web-browser on your
device and enter one of the following links:
• http://10.127.44.32/camconnect
• http://169.254.0.201/camconnect
• The Camera Connect login window is shown:
• Enter user name and password. The default login name is admin and the password
admin (these can be changed after login).
• Click or tap Login. The Camera Connect user interface is shown.
+
Note
+ ☞
Note
All user entries in the Camera Connect application are case sensitive.
Click the IP tab at the top op the page; a row of sub tabs appears. The following sub tabs are
used to configure the IP Media Network: Network Ports, NMOS, Main Video, Highspeed
Video, Live | Mon, Extern Video, Audio, Intercom, PTP, DirectIP and DirectIP+:
To Next Page
Loading...
