GRASS VALLEY LDX 86 HS - 6.7 Diagnostics Menu

LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0) 101
Chapter 6 - Camera menu reference
6.7 Diagnostics menu
Menu item Values Default Level File Description
Communication
Connections
BS Connected Yes, No — User 2 — Indicates if an XCU or Base Station is
connected to the camera.
C2IP Panels 0..99 — User 2 — Shows number of C2IP control panels that are
connected to the camera.
LDK Connect GW Yes, No — User 2 — Indicates the presence of an LDK Connect
Gateway in the camera network.
Ser Stats (DTCP) (Advanced settings)
Ser Stats (PCI) (Advanced settings)
SPI Stats (Advanced settings)
Transmission
Cable Length 0%..200% 0% User 0 — Shows % of cable length used with respect to
maximum cable length. Values > 100 indicate
that transmission is below specification.
Cable Status OK, Critic, Error,
NoSig
OK User 0 — Shows status of the transmission cable:
OK = transmission is OK
Critic = cable status is critical but transmission
will continu.
Error = cable quality is too low and
transmission is not guaranteed.
NoSig = no signal detected
Signal Status OK, Critic, Error,
NoSig
OK User 0 — Shows status of the transmission signal:
OK = transmission is OK
Critic = signal status is critical but transmission
will continu.
Error = signal quality is too low and
transmission is not guaranteed.
NoSig = no signal detected
BS->CAM
Cable Status OK, Critic, Error,
NoSig
NoSig Service — Shows status of the transmission signal:
Signal Status OK, Critic, Error,
NoSig
NoSig Service — Shows status of the transmission signal
RX Margin -100 dB .. 100 dB 0 dB Service — Shows received optical margin.
CAM -> BS
Cable Status OK, Critic, Error,
NoSig
NoSig User 0 — Shows status of the transmission signal:
Signal Status OK, Critic, Error,
NoSig
NoSig User 0 — Shows status of the transmission signal
RX Margin -100 dB .. 100 dB 0 dB User 0 — Shows received optical margin.
Transm Details
Opt Module Unknown,
FTLF1424P2
Unknown Service — Shows received optical margin.
RX Power (uW) 0...6553.5 0 Service —
RX Power (dBm) -100 .. 100 0 Service —
TX Power (uW) 0...6553.5 0 Service —