GRASS VALLEY LDX 86 HS - Transmission Connector; External Video Output Connector; Script Light Connector; Serial Private Data) Connector

LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0) 113
Chapter 8 - Connectors
8.2.4 Transmission connector
Depending on adapter type and connector type. Various types are available at ordering
8.2.5 Reference input / External video input connector
8.2.6 External video output connector
8.2.7 Script light connector
8.2.8 RS-232 (serial private data) connector
This connector is used to genlock the camera to a 0.6 Vpp HD tri-level reference
input signal when in stand alone mode or as an external video input for a second
camera.
BNC connector
This connector is used to output the external video signal (HD-SDI 1/5 Gbit/s).
The selection for EXT1, EXT2 or EXT3 is set in the camera menu. Default setting
is EXT3.
BNC connector
Pin Description
1 GND
2 On Air signal *)
3 Not connected
4 +12 V (max. 100 mA)
Hirose 4-pin female
connector
3
2
4
1
Shield of cable directly to the
connector housing.
Manufacturer code: HR10A-7R-4S
*) In parallel with Auxiliary connector
pin 20
Used for serial data communication
between XCU and adapter (RS-232
levels, 100 kBit/sec max).
Note: the second private data channel
is reserved for future use.
Manufacturer code: HR10A-7R-6SB
Hirose 6-pin female
connector
Pin Description
1 GND
2TxD1
3 TxD2 (future use)
4 GND
5RxD1
6 RxD2 (future use)
3
2
4
1
5
6