GRASS VALLEY LDX 86 HS - Side Panel; Teleprompter Output; Analog Viewfinder Output; Analog Reference Input

116 LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0)
Chapter 8 - Connectors
Caution
The input voltage must not exceed 17 V.
8.2.14 Side panel
8.2.15 Teleprompter output / Analog viewfinder output / Analog reference input
Teleprompter out/
Analog Ref in
Ethernet
connector
This connector is used as a teleprompter output (CVBS) or analog viewfinder
output (CVBS). Signal selection for this connector is done in the camera menu:
Configuration > Signals > TP Output
In stand-alone mode this connector can be used as an analog reference input (3-
level sync) to connect a second camera.
BNC connector