277
Masterpiece
User Manual
Up to 31 stills/clips can be entered into sub-clips for each Store. In the Store Contents menu,
the Store that contains the sub-clips will have the number of stills/clips loaded at the bottom
right of the minipic (as shown above in the right hand side menu).
To see the Sub-Clips that were just loaded, enter the Store - Contents menu. The selected
Store that contains the sub-clips should have a yellow box around the Store. Use the top rotary
control to scroll through the loaded the sub-clips.
Next, enter the Contents menu, then using the “Selected Sub-Clip” parameter to scroll
through the list of sub-clips. Information regarding the video standard, length of clip etc. is
displayed in the left side of the menu.
The loaded sub-clips are displayed along the bottom of the menu. The user can use Sub-Clip
parameter to scroll through them or use their finger to slide the list horizontally left/right to get
to the desired sub-clip.
On the Masterpiece control surface, if the crosspoint that the Store containing the sub-clips is
selected, then what ever sub-clip is selected will be displayed on a monitor.
Delete Sub-Clip - will delete the selected sub-clip still/clip out of the Store
Clear Store - will clear all sub-clips out of the selected Store.
Automatic Reload - when set to Yes this causes the still or clip to be automatically reloaded
from the hard disk whenever the original file location is updated. If the Store contains
something that was grabbed rather than loaded, then this has no affect.
Lock Store - will lock the Store down and not allow any sub-clips to be deleted from or any
changes made to the selected Store.
To Next Page
Loading...
