334
Peripherals
Peripherals - Engineering Router Control
The user will now have to configure the protocol so that Masterpiece can communicate with
the router. Touch the {Configure…} menu link button and the “Protocol Config” menu is
displayed. Use the “Transport Type” parameter to select the communications transport type,
then, setup the “IP Client Configuration” details.
Once setup, touch the {Apply} button.
Then back in the Peripherals main menu, touch the {Activate} button to activate the protocol.
Peripherals Setup
Touch the {PERIPH} button to enter the “Peripherals” menu. Then touch the {Router
Connections…} menu link button.
To Next Page
Loading...
