336
Peripherals
Peripherals - Engineering Router Control
Setting up the User Config - Crosspoint Mapping - External Router configuration
In the Crosspoint Mapping menu, touch the {External Router…} menu link button.
In the “External Router” menu, select free Xpts that are not being currently used, there are a
total of 160 variable Xpts available. Each external router source required on the Masterpiece
will need its own router Xpt.
Use the “Crosspoint” parameter to select the required “Xpt” and then touch the “Fill Source”
attacher to enable the parameters and set the “External” parameter to “On”
Touch the attacher below the “Fill Source” attacher, then use the parameter controls to set the
“Matrix, Level and Source” for the selected XPT (originally set in the “Peripherals - Router
Connections” menu).
To Next Page
Loading...
