376
Peripherals
Peripherals - Others
Peripherals Setup
Touch the {Peripherals} menu button, then in the Peripherals main menu, touch the {Audio
mixer…} menu link button.
In the “Audio Mixer” menu, use the “Fader Module Assign” parameters to assign the MAV-Fader
modules to the “Protocol Slot” this will allow the MAV-Faders to work with the Yamaha Audio
Mixer.
Use the protocol “Source” parameter to map the protocol sources to the Yamaha Inputs, Auxes,
Buses, Groups etc.
See the “Protocol Source Mapping” tables at the rear of this document as a reference.
Assign a fader type in the menu (MAV-Audio Fader) for each fader to enable the Yamaha
communication.
To Next Page
Loading...
