388
Peripherals
Peripherals - Others
Using the VISCA Protocol
Touch the {Peripherals} menu link button, then in the Peripherals menu touch the {VISCA
Robotics...} menu link button.
Once in the VISCA Robotics menu, using the Port parameter select the RS422 port (named
VISCA) that is connected to the camera, once connected, one of the camera control buttons
will turn Blue with a number, up to 7 cameras can be connected.
Controlling the Camera
There are two ways to control the robotic camera:
Using the Pre-Defined Command parameter
Using the Masterpiece Control Surface joystick
Pre-Defined Camera Commands
The first method described here will be using the Pre-Defined camera commands in the
Command parameter.
To Next Page
Loading...
