GRASS VALLEY OCP 400 - Configurations; Studio Configuration

OCP 400 Operational Control Panel User’s Guide (v12.0) 15
Chapter 2 - Configurations
Chapter 2
Configurations
2.1 Studio configuration
One or more OCP 400 control panels are connected to the C2IP camera control network. The
IP address and other options for the Ethernet connection can be set up in the OCP Setup
menu.
XCU/Base Station #n
C2IP Camera
Control
Ethernet
Infrastructure
OCP 400 #n
Studio camera #n
OCP 400 #1
Tally signal
XCU/Base Station 1Studio camera 1
XCU/Base Station 2Studio camera 2